Anchoring & Docking - Docking Accessories

Mantis Underwater Add-On Light Add an additional light to expand the standard Mantis Dock Lighting System from a 3 light kit to a 4 light package. All necessary mounting hardware, Zip-Mount™ ties and cabling are supplied with the add-on light option package. Each Mantis Dock Lighting Kit can accommodate up to a maximum of 4 lights, to add addition lights, additional kits will need to be purchased (4 light maximum per kit).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Mantis Underwater Dock Lighting System - RGBW Full-ColorThe technology, reliability, value, and performance of the world’s best selling underwater light in an easy-to-install all-inclusive dock lighting package. The Mantis dock lighting system includes everything needed to transform your dock or seawall into a dazzling nighttime seascape. And with Mantis’ innovative Zip-Mount™ universal mounting system, underwater installation is a snap – even on barnacle-encrusted pilings!Mantis Dock Lights are constructed with marine grade bronze housings and heat tempered glass to withstand the hashes of coastal environments. Each light is equipped with 25' of submersible heavy duty cable and therefore requires no complex conduit installation.The Manits Dock Lighting System incorporates an innovative Zip-Mount™ universal mounting system which allows for the lights to be installed in a snap, even on barnacle-encrusted pilings. No specialized tools or certification is required to install the Mantis Dock Lighting System.Features: Complete kit includes everything needed for easy installation on most pilings or seawalls Leverages the technology and experience of the world’s best-selling underwater lights Plugs into any standard switched outlet Mount 6 inches below typical low tide mark  (can operate above water without damage) Innovative Zip Mount™ universal mounting system Add-on light option available (4 lights per power converter) 2000 lumens output per light, 6000 lumens output per kit Mantis Dock Lighting System is currently only available in Full-Color RGBW Spectrum output Everything you need to install Mantis is included within the kit for simple plug and play installation. A basic 3 light kit can be installed straight from the box in as little as 90 minutes. And if that is not easy enough, Mantis will plug in to any standard switched outlet.What is included in the kit?  3 Full-Color RGBW Dock Lights with integrated 25’ cable  Innovative Zip-Mount™ universal light mounting system  AC to DC Power Converter in weatherproof enclosure  All Required Mounting Hardware  UL Listed* – 3 year warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Full Color RGBW Material: Bronze Watts: 25W Voltage - Input Range (Volts): 10-30V Box Dimensions: 12"H x 12"W x 12"L WT: 18 lbs UPC: 089300015259 Quick Guide (pdf)

Read more less

Tar Black Snubber Fender - Pair Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.Features:  Rubber-like material doesn’t slide along the railing Does not clunk around or leave marks on your boat Quick simple attachment and detachment No need to attach the line permanently through the compensator Can also be attached while the line is tied on both ends No need for loose clips Applications: Snubber FENDER is suitable for all types of boats that have handrails Fender lines with a diameter of 5-8 mm and also fits flat ties Fits chains, ropes, and bars Specifications:  Size: 138 x 40 x 24 mm Weight: (lb) 0.17 / (g) 77  Weight (pair): (lb) 0.34 / (g) 154 *Sold as a pair

Read more less

Cumulus White Snubber Twist - PairSnubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock. Snubber products are made from carefully selected, high-quality materials and are made to last severe weather conditions. The products will not lose color or leave marks on your boat. All Snubber products are designed and made in Finland.Features:  Fits different line types and diameters, including ties Can be attached while the line is tied on both ends Quick simple attachment and detachment No need to attach the line permanently through the compensator No need for loose clips No rubber or metal material Does not clunk around or leave marks on your boat Applications: Can be used for the anchor line Motor and sailing boats Optimal elasticity and fast recovery to original size and length to absorb shocks in docking Specifications:  Designed for 1102 – 13200 lb or 500 – 6000 kg boats Measurements: 542 x 55 x 54 mm Weight: (lb) 0.83 / (g) 375 *Sold as a pair

Read more less

Navy Blue Snubber Fender - PairSnubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.Features:  Rubber-like material doesn’t slide along the railing Does not clunk around or leave marks on your boat Quick simple attachment and detachment No need to attach the line permanently through the compensator Can also be attached while the line is tied on both ends No need for loose clips Applications: Snubber FENDER is suitable for all types of boats that have handrails Fender lines with a diameter of 5-8 mm and also fits flat ties Fits chains, ropes, and bars Specifications:  Size: 138 x 40 x 24 mm Weight: (lb) 0.17 / (g) 77  Weight (pair): (lb) 0.34 / (g) 154 *Sold as a pair

Read more less

Moon Grey Snubber Twist - IndividualSnubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock. Snubber products are made from carefully selected, high-quality materials to last severe weather conditions. The products will not lose color or leave marks on your boat. All Snubber products are designed and made in Finland.Features:  It fits different line types and diameters, including ties Can be attached while the line is tied on both ends Quick simple attachment and detachment No need to attach the line permanently through the compensator No need for loose clips No rubber or metal material Does not clunk around or leave marks on your boat Applications: It can be used for the anchor line Motor and sailing boats Optimal elasticity and fast recovery to original size and length to absorb shocks in docking Specifications:  Designed for 1102 – 13200 lb or 500 – 6000 kg boats Measurements: 542 x 55 x 54 mm Weight: (lb) 0.83 / (g) 375 *Sold as an Individual

Read more less

Cumulus White Snubber Fender - PairSnubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.Features:  Rubber-like material doesn’t slide along the railing Does not clunk around or leave marks on your boat Quick simple attachment and detachment No need to attach the line permanently through the compensator Can also be attached while the line is tied on both ends No need for loose clips Applications: Snubber FENDER is suitable for all types of boats that have handrails Fender lines with a diameter of 5-8 mm and also fits flat ties Fits chains, ropes, and bars Specifications:  Size: 138 x 40 x 24 mm Weight: (lb) 0.17 / (g) 77  Weight (pair): (lb) 0.34 / (g) 154 *Sold as a pair

Read more less

Tar Black Snubber Twist - PairSnubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock. Snubber products are made from carefully selected, high-quality materials to last severe weather conditions. The products will not lose color or leave marks on your boat. All Snubber products are designed and made in Finland.Features:  It fits different line types and diameters, including ties Can be attached while the line is tied on both ends Quick simple attachment and detachment No need to attach the line permanently through the compensator No need for loose clips No rubber or metal material Does not clunk around or leave marks on your boat Applications: It can be used for the anchor line Motor and sailing boats Optimal elasticity and fast recovery to original size and length to absorb shocks in docking Specifications:  Designed for 1102 – 13200 lb or 500 – 6000 kg boats Measurements: 542 x 55 x 54 mm Weight: (lb) 0.83 / (g) 375 *Sold as a pair

Read more less

Tar Black Snubber Twist - IndividualSnubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock. Snubber products are made from carefully selected, high-quality materials to last severe weather conditions. The products will not lose color or leave marks on your boat. All Snubber products are designed and made in Finland.Features:  Fits different line types and diameters, including ties It can be attached while the line is tied on both ends Quick simple attachment and detachment No need to attach the line permanently through the compensator No need for loose clips No rubber or metal material Does not clunk around or leave marks on your boat Applications: It can be used for the anchor line Motor and sailing boats Optimal elasticity and fast recovery to original size and length to absorb shocks in docking Specifications:  Designed for 1102 – 13200 lb or 500 – 6000 kg boats Measurements: 542 x 55 x 54 mm Weight: (lb) 0.83 / (g) 375 *Sold as an Individual

Read more less

Cumulus White Snubber Twist - IndividualSnubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock. Snubber products are made from carefully selected, high-quality materials to last severe weather conditions. The products will not lose color or leave marks on your boat. All Snubber products are designed and made in Finland.Features:  Fits different line types and diameters, including ties It can be attached while the line is tied on both ends Quick simple attachment and detachment No need to attach the line permanently through the compensator No need for loose clips No rubber or metal material Does not clunk around or leave marks on your boat Applications: It can be used for the anchor line Motor and sailing boats Optimal elasticity and fast recovery to original size and length to absorb shocks in docking Specifications:  Designed for 1102 – 13200 lb or 500 – 6000 kg boats Measurements: 542 x 55 x 54 mm Weight: (lb) 0.83 / (g) 375 *Sold as an Individual

Read more less

Buoy Red Snubber Fender - PairSnubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.Features:  Rubber-like material doesn’t slide along the railing Does not clunk around or leave marks on your boat Quick simple attachment and detachment No need to attach the line permanently through the compensator Can also be attached while the line is tied on both ends No need for loose clips Applications: Snubber FENDER is suitable for all types of boats that have handrails Fender lines with a diameter of 5-8 mm and also fits flat ties Fits chains, ropes, and bars Specifications:  Size: 138 x 40 x 24 mm Weight: (lb) 0.17 / (g) 77  Weight (pair): (lb) 0.34 / (g) 154 *Sold as a pair

Read more less

Buoy Red Snubber Twist - PairSnubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock. Snubber products are made from carefully selected, high-quality materials to last severe weather conditions. The products will not lose color or leave marks on your boat. All Snubber products are designed and made in Finland.Features:  It fits different line types and diameters, including ties It can be attached while the line is tied on both ends Quick simple attachment and detachment No need to attach the line permanently through the compensator No need for loose clips No rubber or metal material Does not clunk around or leave marks on your boat Applications: Can be used for the anchor line Motor and sailing boats Optimal elasticity and fast recovery to original size and length to absorb shocks in docking Specifications:  Designed for 1102 – 13200 lb or 500 – 6000 kg boats Measurements: 542 x 55 x 54 mm Weight: (lb) 0.83 / (g) 375 *Sold as a pair

Read more less