Sailing

57mm Carbo Single Ratchet Block with SwivelCarbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.Features: On/off switch operates from both sides Standard grip: medium/light air; 10:1 holding power Sheave Ø (mm): 57 mm Sheave Ø (in): 2-1/4 in Maximum line Ø (mm): 10 mm Maximum line Ø (in): 3/8 in Maximum working load (kg): 227 kg Maximum working load (lb): 500 lb

Read more less

10mm Lead RingLead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6 aluminum for a smooth, slippery surface, and with no moving parts, wear is minimal.Features: Center Hole: 10mm (7/16") Outer groove width: 6mm (1/4")

Read more less

40mm Carbo Single Ratchet Block with SwivelCarbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. 2608, 2609, and 2614 have on/off switches. Features: Sheave Ø (mm): 40 mm Sheave Ø (in): 1-9/16 in Maximum line Ø (mm): 10 mm Maximum line Ø (in): 3/8 in Maximum working load (kg): 136 kg Maximum working load (lb): 300 lb

Read more less

60mm Single Aluminum Element Block with Swivel & BecketElement blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life.Features: Sheave Ø (mm): 60 mm Sheave Ø (in): 2-3/8 in Maximum line Ø (mm): 14 mm Maximum line Ø (in): 9/16 in Maximum working load (kg): 1100 kg Maximum working load (lb): 2425 lb

Read more less

Standard Carbo-Cam® CleatHarken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent. Specifications: Height: 30mm / 1-3/16in. Length: 65mm / 2-9/16in. Width: 32mm / 1-1/4in Weight: 42g / 1.44oz Minimum line: 3mm / 1/8in Maximum line: 10mm / 3/8in Fastener spacing: 38mm / 1-1/2in Fasteners: 5 FH mm / #10 FH in Maximum working load: 91kg/ 200lb Breaking load: 227kg / 500lb Pawls: Plastic carbon-matrix

Read more less

29mm Double Carbo Air BlockLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming.Specifications: Sheave: 29mm / 1-1/8in. Length: 54mm / 2-1/8in. Weight: 34g / 1.2oz Maximum line: 8mm / 5/16in Maximum working load: 299kg/ 660lb Breaking load: 737kg / 1625lb

Read more less

22mm Micro Block with SwivelLow-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes.Specifications: Sheave: 22mm / 7/8in. Length: 60mm / 2-3/8in. Weight: 28g / 1oz. Shackle pin: 4mm / 5/32in, Maximum line: 6mm / 1/4in. Maximum working load: 91kg / 200lb Breaking load: 544kg/ 1200 lb

Read more less

29mm Carbo Air Block with SwivelLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming.Specifications: Sheave: 29mm / 1-1/8in Length: 66mm / 2-5/8in Weight: 26g / .9oz Shackle pin: 4mm / 5/32in Maximum line: 8mm / 5/16in Maximum working load: 150kg / 330lb Breaking load: 454kg / 1000lb

Read more less

Micro Cam-Matic Aluminum CleatHarken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.Specifications: Height: 22mm / 7/8in. Length: 48mm / 1-7/8in. Width: 24mm / 15/16in. Weight: 26g / .93oz Minimum line: 2mm / 3/32in Maximum line: 6mm / 1/4in. Fastener spacing: 27mm / 1-1/16in. Fasteners: 4 RH mm / #8 RH in. Maximum working load: 91kg/ 200lb Breaking load: 181kg / 400lb Pawls: Aluminum

Read more less

75mm Carbo Air Block with SwivelLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming.Specifications: Sheave: 75mm / 2-15/16in Length: 137mm / 5-3/8in Weight: 195g / 6.9oz Shackle pin: 6mm / 1/4in Maximum line: 14mm / 9/16in Maximum working load: 550kg / 1213lb Breaking load: 1650kg / 3638lb

Read more less

Standard Cam-Matic® Aluminum CleatAluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications: Height: 30 mm / 1-3/16 in Length: 65 mm / 2-9/16 in Width: 32 mm / 1-1/4 in Weight: 71 g / 2.5 oz Minimum line: 3 mm / 1/8 in Maximum line:12 mm / 1/2 in Fastener spacing: 38 mm / 1-1/2 in Fasteners: 5 FH mm / 10 FH in Maximum working load: 136 kg / 300 lb Breaking load: 340 kg / 750 lb Pawls: Aluminum

Read more less

Micro Carbo Cam Cleat - No Original PackagingHarken® ball-bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical or where adjustments are less frequent.Specifications: Height (in): 7/8 in Height (mm): 22 mm Length (in): 1-7/8 in Length (mm): 48 mm Width (mm): 24 mm Width (in): 15/16 in Weight (g): 19 g Weight (oz): 0.67 oz Maximum line Ø (mm): 6 mm Maximum line Ø (in): 1/4 in Fasteners (mm): 4 RH mm Fasteners (in): #8 RH in Maximum working load (kg): 68 kg Maximum working load (lb): 150 lb Breaking load (kg): 136 kg Breaking load (lb): 300 lb Minimum line Ø (mm): 3 mm Minimum line Ø (in): 1/8 in Fastener spacing (mm): 27 mm Fastener spacing (in): 1-1/16 in Pawls: Plastic carbon-matrix

Read more less