Sailing

Series 40 Ball Bearing Block - Single Upright LeadLead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers. Precision molded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Applications:Typically used for halyards at the mast base.Materials: Acetal ball bearings UV stabilized Acetal sheave Grade 316 stainless steel load housing

Read more less

Series 40 Ball Bearing Orbit Block - CheekFeatures: Ultra Lightweight Low friction 2-stage Orbital ball bearing system Highest working load in its class Low profile and compact High performance cleating Base suits curved mounting surface Low mounting points for maximum strength LightweightKilogram for kilogram of working load, BB and RT Orbit Blocks™ are the world’s lightest. The unique orbital design allows the bearing to only be in the active areas of the floating sheave. This minimizes the mass of the inactive return race and hub.Weight and bulk are further reduced in the different block configurations. The ball bearing single and becket block has a through-sheave becket arrangement. The result? The lowest weight possible.Multi-sheave blocks have only single intermediate cheeks and an ultra-light and efficient head arrangement. This gives a 30% weight saving advantage over the nearest competitor. Other brands just link together their single blocks. This results in unnecessary double cheeks between each sheave, held together by a heavy steel channel across the top of the block.Highest Working Load In It's ClassThe orbital ball-bearing arrangement gives the largest possible bearing race diameter. This maximizes load performance. The proven Ronstan 2-stage bearing system features high compression grade acetal ball bearings and a secondary full-contact bearing. This gives minimum friction across the full working load range.The floating sheave and bearing system is supported by a fiber-reinforced load frame. The design was computer modeled to be stress optimized.Recommended fasteners - 3 x 4mm (5/32") countersunk head screwsApplications: Mainsheet systems on spinnaker sheet on dinghies to 5m (16ft) Spinnaker sheets on dinghies, sportsboats and small keel boats to 5m (16ft) Halyard, vang and backstay applications on boats to 8m (26ft) Control line applications on larger yachts Materials: Ball Bearings - High compression strength carbon black Acetal. Stage 2 Bearing - Glass fibre reinforced, MoS2 impregnated Nylon Frame/Cheeks - Toughened, glass fibre reinforced Nylon Sheave - Carbon fiber reinforced, PTFE impregnated Nylon

Read more less

MF 765/8 Cleat (834030)Molded from high-strength Marelon®, Forespar's cleats have been thoroughly tested by independent laboratories and manufacturers of yachts and power boats all over the world. Their strength, light weight and low cost have contributed to their increased use in the marine industry. The use of Marelon® allows our cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion. Marelon will also prevent our cleats from softening on hot days or freezing in winter. Specifications: Type: Cleats Box Dimensions: 1"H x 4"W x 8"L WT: 0.4 lbs

Read more less

Railfast® 324 Flag Pole Holder - 1" BaseRailfast® assembly and flag pole holder makes installing flag poles a breeze. The holder can mount at any angle on a horizontal bow or stern rail and will accommodate flag poles with 1” base diameters. A set screw holds flag pole in place.

Read more less

Clevis Pin - 4.7mm (3/16") x 19mm (3/4")Grade 316 Stainless Steel

Read more less

Rubber Spreader Boot - Pair - Large - WhiteFeatures: White Rubber Spreader Boot Large Spreader Insert: 2" - 3" Stay Insert: 3/16" Length: 2-7/8" Height: 7-1/2" Specifications: Type: Spreaders Box Dimensions: 3"H x 5"W x 8"L WT: 0.5 lbs UPC: 725060920012

Read more less

Low Friction Ring - 21mm HoleLow Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a nicely rounded internal profile for smooth control line trim under load, and a deep external groove to retain the rope securely within the large shoulders when spliced into a loop. Features: Compact & lightweight Low friction Large shoulder secure allowing for rope lashing Durable Simple & reliable design Low maintenance Specifications: Color: Black Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 9316800525966

Read more less

Trunnion Snap Shackle - Large Swivel Bail - 122mm(4-3/4") LengthTrunnion swivel head allows both 360° rotation and side to side articulationMaterials: Grade 15-5PH investment cast stainless steel body and hasp Grade 316 stainless steel plunger pin and spring

Read more less

Waxed Whipping Twine - 1.0mm x 46M - WhiteExcellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem.  The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.Technical Specifications: Color - White Material - Polyester (PES) Thickness -  .04" (1.0mm) Length -  150' (46 M) *Sold as an Individual Brochure (pdf)

Read more less

Series 40 High Load Exit Box for Single Rope or WirePlain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encounteredApplications:Ideal applications where lines (rope or wire) need to be led through decks, bulkheads or spars minimizing friction and chafingMaterials: Nylatron&regl sheave Grade 316 Stainless Steel cheeks Specifications:Sheave Ø: 40.0mm(1-9/16")Max. Rope Ø:10.0mm(3/8")Max. Cable Ø: 5.0mm(3/16")B.L.: 1,000kg(2,200lbs) Specifications: Color: Stainless Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 9316800335121

Read more less

Kite Block - Black w/White SheaveFeatures: Lightweight durable construction Economical Maintenance free Applications: Vang, cunningham and trapeze retriever systems on dinghies Leech line tackles, bunk adjusters etc on larger yachts Materials: U.V. stabilized Acetal sheaves Nylon cheeks Specifications:Sheave Ø:16mm(5/8")Max. Rope Ø:4mm(5/32") Brochure (pdf)

Read more less

Series 30 Ball Bearing Orbit Block™ - Triple - BecketBall Bearing Orbit Blocks™ boast the highest strength-to-weight ratio available. This is achieved through all-composite reinforced polymer materials and multiple attachment options. Their precision design provides the optimum number of ball bearings for minimum friction while weight reduction is achieved through the use of fiber-reinforced composites in the block head, cleat arms and beckets.Features: Lightweight Highest working load in its class Secure, versatile and secure attachement Low profile and compact Applications: Mainsheet systems and spinnaker sheets on dinghies to 5M(16') Halyard, vang and backstay applications on boats to 5M(16') Control line applications on larger yachts Materials: Sheave: High compression strength carbon black Acetal Ball Bearings: High compression strength Acetal Frame/Cheeks: Toughened, glass fiber reinforced Nylon Link: UV stabilized, multi-strand impregnated SK75 Dyneema® Specifications:Sheave Ø:t30mm(1-3/16")Max. Rope Ø:t8mm(5/16")M.W.L.:t550kg(1,210lbs)B. L.:t1,100kg(2,430lbs)Weight:t75g(2.6oz) Quick Guide (pdf)

Read more less