Lighting

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - Stainless Steel Bezel - 12VAttractive, energy efficient lighting for interior and exterior use.Hella Marine round LED courtesy lamps can be installed almost anywhere on board.Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure. Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer. Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable) Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Stainless LED Color: White Dimming: No Box Dimensions: 2"H x 4"W x 8"L WT: 0.3 lbs UPC: 9416325177616

Read more less

NaviLED Port & Starboard Pair - 2nm - Colored Lens/White HousingCompact LED navigation lamps. Attractive, power saving and ultra reliable. Designed and manufactured in New Zealand, NaviLED® lamps save power on board and provide outstanding durability.Ultra low current drawNaviLED® lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2W combined!No bulbs, No maintenance, Ultra long service lifeHella marine LED technology has no filaments to break making NaviLED® lamps extremely shock and vibration proof for proven reliability and safety in demanding conditions.Multivolt™ 9-33V DCAdvanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.Fully sealed for life. IP 67 certifiedEach NaviLED® lamp is a completely sealed unit. High impact housings ensure durability from waves and impact.Pre-wired with Marine CableSingle core (120mm) or twin core (2.5m) sheathed marine cable assemblies available. Ensures time saving, completely sealed installations.Specifications: Material Description: UV resistant, enhanced impact resistant acrylic lens High impact shroud Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats) Cable: Pre-wired with marine cable Operating Voltage: Multivolt™ 9-33V DC (earlier version 8-28V DC Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts Power Consumption: Less than 2W combined Degree of Protection: IP 67 - Completely Sealed Weight: 60g (with 120mm cable version) Approvals:  IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ Specifications: Lens Color: Red/Green Visible Range (Miles): 2nm Housing: White Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 2"H x 4"W x 8"L WT: 0.3 lbs UPC: 9416325196501 Quick Guide (pdf)

Read more less

Capri3 Spreader Light - White Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Surface Mount Navigation Light - Classic Aluminum - Port RedFor retrofit and new applications where a molded-in pocket is not possible or practical, Lumitec offers our surface mount navigation lights. Clean styling and unmatched reliability. Choose classic aluminum half-round design for mounting to vertical surfaces, or the more contemporary composite version for horizontal mounting surfaces.Features: Output: Port Red Visibility: USCG2NM Voltage: 10-30V DC 12V DC Amps: 21-26mA 24V DC Amps: 13-15mA Conforms to: ABYC A16 Specifications: Housing: Aluminum Lens Color: Red Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 5"H x 5"W x 8"L WT: 0.6 lbs UPC: 089300015778 Brochure (pdf)

Read more less

Aurora LED Dome Light - Polished Stainless Steel Finish - 2-Color White/Blue DimmingCustomers told us they wanted a high quality LED replacement for the ubiquitous dome light. It had to be bright, with wide even light. They wanted a clean look, an intuitive and reliable switch, and a notable level of quality. We delivered, and then added IP67 immersion protection. We then raised the bar with multiple color output options and dimming. Lumitec's Aurora Dome Light stands apart.Specifications: Voltage: 10 - 30vDC 12vDC Amps: 290mA 24vDC Amps: 160mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 4 Lumens (White):180 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.00 (10.16cm) Height: 4.00" (10.16cm) Depth: 0.73" (1.84cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 10-30v Dimming: Yes Housing: Stainless LED Color: White/Blue LED: Yes Box Dimensions: 4"H x 6"W x 8"L WT: 0.4 lbs UPC: 089300600479 Brochure (pdf)

Read more less

Caprera2 - LED Flood Light - 2-Color White/Red DimmingWhat do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Caprera2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USASpecifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 16 Lumens (White): 610 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 2"H x 4"W x 7"L WT: 0.6 lbs UPC: 089300103635 Quick Guide (pdf)Brochure (pdf)

Read more less

Orbit - Flush Mount Down Light - Brushed Finish - 4-Color White/ Red/Blue/Purple Non-DimmingClass-leading output, weatherproof construction, and the simplest installation in the industry - Lumitec's Orbit Flush Mount Down Lights stand apart from the crowd. With a shallow-depth profile (less than 1/2" mounting depth) and a secure composite mounting system the lights are ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. Fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming and multi-color control without external control modules, specialized switches, or additional wire runs.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 300mA 24V DC Amps: 160mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 4 Lumens (White): 136 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 1.99" (5.05cm) Height: 1.99" (5.05cm) Depth: 0.72" (1.82cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: LED: Yes Voltage - Input Range (Volts): 10-30v Dimming: No Housing: Brushed LED Color: White/Blue/Red/Purple Box Dimensions: 3"H x 3"W x 3"L WT: 0.3 lbs UPC: 089300103246 Quick Guide (pdf)Brochure (pdf)

Read more less

High Intensity "Anywhere" Light - Brushed Housing - Blue Non-DimmingWhere can you use a light that is attractive, bright, and small, completely sealed and withstands the elements yet blends with well-appointed interiors? Well, anywhere! Lumitec's "Anywhere Light" is the high intensity surface mount light that you don't have to hide. Quality aluminum housing with Type II anodizing for an appealing satin look that will stand up to the elements. Choose white, red, or blue output. Completely sealed, IP67 compliant.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 315mA 24V DC Amps: 175mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 4 Lumens (White): 136 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 1.73" (4.39cm) Height: 1.73" (4.39cm) Depth: 0.45" (1.15cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 10-30v Housing: Brushed LED Color: Blue Dimming: No Box Dimensions: 3"H x 3"W x 3"L WT: 0.3 lbs UPC: 089300102027 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Nevis - High Intensity Engine Room LightAnother high output alternative to large, boxy, unreliable fluorescents. Certified Ignition protected and small enough to mount anywhere. Wide beam angle that douses hard to light areas with a bright even light. Completely sealed, IP67 compliant and intrinsically safe.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 900mA 24V DC Amps: 450mA Correlated Color Temperature: 6500 Color Rendering Index: 70+ Rated Watts: 11 Lumens (White): 19 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 5.00" (12.7cm) Height: 2.5" (6.35cm) Depth: 0.63" (1.60cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 11w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 4"H x 4"W x 6"L WT: 0.8 lbs UPC: 089300103352 Quick Guide (pdf)Brochure (pdf)

Read more less

Value Fit Sport Series 12 LED Flood Light Bar - 8" - WhiteFeatures: 12 High Intensity LEDs Die-Cast Aluminum Housing Stainless Steel Bracket Calculated/Raw Lumens: 2640lm Measured Lumens: 1700 36W, 10-30 VDC Dimensions: 8.2"W x 3"H x 3.5"D/208 x 75 x 88mm Specifications: Beam Pattern: Flood Housing: White Length (Inches): 8" Voltage - Input Range (Volts): 10-30v Box Dimensions: 6"H x 6"W x 13"L WT: 3.3 lbs UPC: 760687161608

Read more less

LED Surface Strip Light - White LED - 24V - No SwitchThe Surface Mount Strip lamps from Hella marine are completely sealed, UV and corrosion resistant with an ultra-low profile meaning these lamps are easy to install and ideal for interior or exterior applications.Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.The low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature:5000K (White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming" Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE Specifications: Bulb Type: LED Voltage - Input Range (Volts): 24v Housing: White LED Color: White Dimming: No Box Dimensions: 1"H x 4"W x 13"L WT: 0.3 lbs UPC: 9416325240907 Brochure (pdf)

Read more less

NaviLED Port & Starboard Pair - 2nm - Clear Lens/Black HousingCompact LED navigation lamps. Attractive, power saving and ultra reliable. Designed and manufactured in New Zealand, NaviLED® lamps save power on board and provide outstanding durability.Ultra low current drawNaviLED® lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2W combined!No bulbs, No maintenance, Ultra long service lifeHella marine LED technology has no filaments to break making NaviLED® lamps extremely shock and vibration proof for proven reliability and safety in demanding conditions.Multivolt™ 9-33V DCAdvanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.Fully sealed for life. IP 67 certifiedEach NaviLED® lamp is a completely sealed unit. High impact housings ensure durability from waves and impact.Pre-wired with Marine CableSingle core (120mm) or twin core (2.5m) sheathed marine cable assemblies available. Ensures time saving, completely sealed installations.Specifications: Material Description: UV resistant, enhanced impact resistant acrylic lens High impact shroud Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats) Cable: Pre-wired with marine cable Operating Voltage: Multivolt™ 9-33V DC (earlier version 8-28V DC Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts Power Consumption: Less than 2W combined Degree of Protection: IP 67 - Completely Sealed Weight: 60g (with 120mm cable version) Approvals:  IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ Specifications: Lens Color: Red/Green Visible Range (Miles): 2nm Housing: Black Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 2"H x 5"W x 9"L WT: 0.2 lbs UPC: 9416325196532 Quick Guide (pdf)

Read more less