Sailing

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions.Specifications:Safe working load = 1000 lbs.

Read more less

Rigging Toggle - 1/4" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes include pins. Please see the attached chart for the exact dimensions.

Read more less

Quick Release Lever - 5/16" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. The fitting is rugged, having an ultimate strength of 2500 lbs. A positive stop is provided to prevent jamming fingers between the fitting and wire when thrown open under load and the large surface area of the push pad makes it easier to close the lever under load. Lever take-up is 2-1/8″ to an over-center position and comes with a quick-release pin for positive locking. The extender arm may be had in either 1/4″ or 5/16″ pin size. This is an essential piece of hardware on Catamaran shrouds to allow the crew to right the boat after a capsize. Without it, another boat or extraordinary effort is required. Trailer-able boats up to 26 feet find that a lever on the forestay greatly facilitates stepping and unstepping the mast.Specifications: Approximate breaking strength = 2,500lbs Safe working load = 1000lbs Extender number of holes = 3

Read more less

Handy Lock Turnbuckle Jaw/JawThe 01 Series Handy Lock turnbuckle is one of our oldest products and still stands the test of time. Neat and compact and positively locked without cotter pins or check nuts, the Handy Lock has all the features needed for easy adjustment in a compact package. There are no sharp points to catch lines or tear sails, just flip the lever up to adjust and down to lock. Use the Handy Lock anywhere an easily adjusted turnbuckle is needed.Specifications: Approximate breaking strength = 2,500lbs Safe Working Load = 1,000lbs Thread Size = 1/4-28

Read more less

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes include pins. Please see the attached chart for the exact dimensions.

Read more less

Rigging Toggle - 3/8" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes include pins. Please see the attached chart for the exact dimensions.

Read more less

Double Jaw Rigging Toggle - 5/16" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions.Specifications:Safe working load = 1000 lbs.

Read more less

Quick Release Shroud Adjuster - 1/4" PinDeveloped for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be obtained. 1/4″ pin.Specifications: Pin-to-pin adjustment: 1-3/4″ to 3-5/8″ Safe working load: 400 lbs.

Read more less

Hinged Pad Eye- 5/16"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free. Specifications: T-316 Stainless Steel construction Supplied with backing plate Specifications: Color: Stainless Box Dimensions: 1"H x 4"W x 7"L WT: 0.6 lbs UPC: 762799485856

Read more less

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook.

Read more less

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Read more less

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Read more less