The LAT Forced Reset Trigger + TiN M16-Cut BCG Combo

Matched Combo · The Triggered Company

The LAT paired with a high-polish TiN M16-cut bolt carrier group. One order, one matched setup, no guesswork about whether your carrier will run a forced reset trigger.

The most common reason a forced reset trigger runs poorly has nothing to do with the trigger. It is the carrier. A semi-auto profile BCG will not work with an FRT, and a worn or out-of-spec carrier turns a precise trigger into a troubleshooting project. This combo removes that variable entirely.

The LAT is the match-grade trigger in The Triggered Company's lineup, built on the same drop-in cassette approach as the Disruptor with a refined feel and a variable-rate third position. The carrier is a full M16-cut profile finished in titanium nitride and polished to a mirror shine, so it looks the part through a cutout receiver and runs slicker than a phosphate carrier.

• Harder surface than bare steel. Titanium nitride is a hard ceramic coating. On the wear surfaces of a carrier that cycles hard and often, that matters.
• Lower friction. A slicker carrier means less drag through the receiver, which is exactly what you want when the carrier's return stroke is doing the work of resetting your trigger.
• Polished before it is coated. The carrier and bolt are pre-polished, then finished, so the mirror surface is in the metal underneath rather than sitting on top of a rough part.
• Carbon wipes off. The polished surface does not hold fouling the way phosphate does. Most cleanups are a rag and a few minutes.
• M16 cut, full profile. Required for forced reset triggers. No trimming, no "will this work" guesswork.
• It looks the part. If you run a side-cut or clear receiver, a mirror-polished gold carrier is the reason people ask about your build.

• The LAT — 3-position drop-in cassette trigger from The Triggered Company
• TiN M16-Cut BCG — high-polish titanium nitride, full auto profile, 9310 bolt and 8620 carrier, USA made
• The AR Takedown Tool — the only tool needed for the install, included free

Works with: mil-spec AR-15 lower receivers with standard trigger and hammer pin spacing, properly gassed direct impingement uppers, and a buffer and spring matched to your gas system.

Does not fit: AR-10, .308 and LR-308 platforms, and non-mil-spec lowers with modified pin dimensions. Piston systems may need additional tuning.

If your rifle runs reliably with a standard trigger and mil-spec ammunition, it will very likely run this combo without modification. If you are unsure which buffer to pair with it, start with our AR-15 buffer weight guide.

• Best FRT triggers for the AR-15 — how The LAT and the Disruptor compare to everything else we carry
• The Triggered Company collection — the full trigger lineup
• FRT vs Super Safety — which system fits your build