Winterizing - Oil Change Systems

Oil Changer SystemThis kit is particularly suitable for oil changes or the removal/change of other viscous liquids like antifreeze in tight spaces.Features: The pump is self-priming and can run dry Can be reversed Kit Contains:  5-gallon bucket 12V gear pump with 6 ft. wires with fuse and battery clamps Oil dip hose set with 6mm and 8 mm quick-connect hose connections 5/8 in. port connections 6 amp fuse for continuous duty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Gear Pump Oil Change Kit - 12V12V gear pump with oil change kit. Particularly suitable for oil change or removal/change in of other viscous liquids in tight spaces.Hose set 6mm and 8mm, hose connection, 1,8m wires, fuse and battery clamps included.Features: Self priming and can run dry Reversible flow direction and with pump body in PTFE  Reversible flow direction by changing polarity  For continuous duty Specifications: Weight: 0.4 kg/0.75 lbs Dimensions: 140/5.5L x 90/3.5H x 80/3.15W mm/in  Port Connections: 13 mm (3/8″)  Fuse: 6A fuse *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Reversible: Yes Volts: 12v Box Dimensions: 6"H x 8"W x 8"L WT: 4.1 lbs UPC: 7340176600974

Read more less

Gear Pump with Oil Change Kit80-47508-01 GP8-19 12VLight and compact oil change pump with pump body and gears made of PTFE. Complete with oil dip stickextraction tube 6 and 8 mm (0.236" and 0.315"). 180 cm (70.9") connection wires with baterry clamps.Port connection: Outlet: 14 mm (0.551") hose Inlet: 8 mm (0.315") hoseSelf priming: Up to 1 m (3.28 feet)Capacity: 8 l/min (2.11 GPM)Dimension: 140 x 80 mm (5.51" x 3.15")Weight: 1.1 kgFuse size 12V: 8 A Owner's Manual (pdf)

Read more less

Pro Series Replacement Hose KitUse with: 75-6015, 75-6015P & 75-6065

Read more less

Oil Change Pump with Battery Clips - 12VThis portable, lightweight Premium Electric Oil Pump is easy to use and transport. The self-priming 12V pump attaches to battery terminals with alligator clips and drains oil through the dipstick tube on outboards and sterndrives. Convenient DIY operation saves money on expensive oil changes. Its compact size makes it is easy to store. Includes 48” inlet and 80” outlet hoses. 12VDC. 60W. Maximum run time: 30 minutes. NOT intended for commercial use. NOT suitable for pumping out transmission oil, water, or flammable liquids.Features: Oil flow rate: 0.84 quarts/min @ 140°F (0.8 liters/min @ 60°C) Diesel flow rate: 1.9 quarts/min @ 75°F (1.8 liters/min @ 23°C) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Oil Change Bucket Kit - With Flex Impeller F3B-19Easy to install and extremely versatile, the Johnson Pump Impeller Pump Oil Change System offers advanced motor technology to help make your liquid transfers simple and convenient. With reliable gear pump technology and an easy-to-pour water spout, the Johnson Pump Oil Change System makes the oil-changing process hassle-free. Features: 5.5 gallons per minute & 12V Flexible Impeller Pump Assembly Easy, quick, no-mess, no-hassle, oil change package Replaceable impeller - non-fixed Automatic shut off Complete - ready to use Portable and convenient High temperature-resistant dipstick tube Heavy-duty alligator clips easily clamp directly onto the battery Easy-to-use pour spout for emptying used oil Kit Includes: 12 Volts DC, 15 AMP 5 Gallon Pail Sealed Lid 5.5 GPM Flexible Impeller Pump Assembly Dipstick Tube 8mm = 4' long 6mm = 40" long 70.9" Wire lead with Heavy Duty Alligator Clips Easy Pour Spout

Read more less

Drill PumpsJabsco drill pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. They provide easy powered pumping almost anywhere a hand utility pump might be used. Pumps up to 3.5 gpm Self-priming to 3ft 1/4" diameter shaft Supplied with 3/4" garden hose thread port adapters WARNING: This product can expose you to chemicals including COBALT METAL POWDER which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 3.5 GPM Box Dimensions: 3"H x 6"W x 9"L WT: 0.7 lbs UPC: 671880012577 Quick Guide (pdf)

Read more less

17820 Oil Changer SystemThe Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system's cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Box Dimensions: 8"H x 12"W x 12"L WT: 10.95 lbs UPC: 671880529624 Owner's Manual (pdf)

Read more less

Fluid Extractor - 7 LiterChange your oil through the dipstick tube and pump most any other fluid! For all types of motors, watercraft and vehicles.  Use a TRAC fluid extractor for oil changes and the removal of fuel, coolant and transmission fluid. Use it to pump out bilge water and trapped fluids. Perfect for any situation where draining is difficult. Self-priming pumps create a powerful vacuum to remove almost any non-corrosive liquid.  It’s an easier, cleaner way to drain engines with hard-to-reach drain plugs.Features: Tank-style pumps with two different sized extraction tubes. Clamp holds tubes for tidy storage.  No parts floating around to get lost. Self-Priming Ideal for nearly all forms of fluid extraction (not for corrosive fluids, such as acids) Includes cap, adapters and hoses Hose Sizes: Outer Diameter – 0.34 (11/32)” / Length – 6'; Outer Diameter – 0.2 (3/16)” / Length – 6'

Read more less

Oil Extractor 15L Capacity - Pro SeriesHigh capacity accommodates larger 4-stroke engines. The heavy duty construction makes this extractor perfect for shop use or the mobile service professional. Safe, no-Spark hand operation. Check valve for easy release of displaced air in container. Extra long 48" hoses with fittings included for almost any extraction application. Newly designed decompression valve to release negative pressure. See-through container for quick visual reference. Convenient foot board for added stability while in operation. Pour spout for no-mess fluid disposal. Suitable for engine oil, gear lube, brake fluid, coolant, water etc.Note: Not for use with Flammable or Corrosive products. Owner's Manual (pdf)

Read more less

Fluid Extractor - 3 LiterChange your oil through the dipstick tube and pump most any other fluid! For all types of motors, watercraft and vehicles. Use a TRAC fluid extractor for oil changes and the removal of fuel, coolant and transmission fluid. Use it to pump out bilge water and trapped fluids. Perfect for any situation where draining is difficult. Self-priming pumps create a powerful vacuum to remove almost any non-corrosive liquid. It’s an easier, cleaner way to drain engines with hard-to-reach drain plugs.Features: Tank-style pumps with two different sized extraction tubes. Clamp holds tubes for tidy storage. No parts floating around to get lost. Self-Priming Ideal for nearly all forms of fluid extraction (not for corrosive fluids, such as acids) Includes cap, adapters and hoses Hose Sizes: Outer Diameter – 0.34 (11/32)” / Length – 6'; Outer Diameter – 0.2 (3/16)” / Length – 6'

Read more less

Manual Oil Change Pump Convenient hand pump drains oil through the dipstick on inboard and I/O engines. Includes 2 drain tubes. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less